The cabinets and cassettes are designated for distribution of electrical power supplied to consumers, for protection of the low voltage cable network, and for providing the possibility of switching off a given terminal. The low voltage electric distribution cabinets are used in radial four-core communal and household networks supplied with power by urban transformer stations with a capacity up to 630 kVa
Technical Details
Voltage supply:
Degree of protection:
Temperature of environment during service use:
220/ 380 V ± 10 %, 50 Hz
IP 30 for covered installation IP 43 for open installation
-20 °C до + 40 °C in the open -5 °C до + 40 ° under cover
Degree of insulation:
Climatic performance:
Working position:
660 V
Normal
Vertical
Rated current:
Depending on the diagram
Device
he boards have been manufactured as a welded construction with a protective anticorrosive
coating of polyester dust. There has been provided one-sided service at the front part of the
boards, made possible through one or two doors with fitted locks. The apparatuses in the main
circuits of the boards have been fitted on an installation panel with standard instruments.
The symbols of the apparatuses and the connecting cables have been put on them or near
them meeting the requirements of the diagrams using a secret method. The electric diagram of
each board has been fitted on the inside of the door.
Working Conditions
The boards are designed for work in the open or under cover in temperate climate
Above sea-level height:
Up to 1000 meters
Humidity of air:
Shall not exceed 50 % at a maximum temperature of + 40 °C 90 % at a temperature of + 20 °C
Environment:
Explosion-proof, with absence of chemically aggressive gases and liquids, water vapors and current - conductive dust.